Customization: | Available |
---|---|
Certification: | ISO9001, CSC, CE/EU, ECE, CE, ASME Storage Container |
Material: | Carbon Steel ISO Container |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
20FT Liquid Tank Container | ||
Specifications - ISO tank container manufacturers
|
||
Frame Dimensions (L x W x H)
|
6058 x 2438 x 2591 mm
|
|
Nominal Capacity
|
25000 litre (±0.75%)
|
|
Maximum Gross Mass
|
36000 kgs
|
|
Tare Mass
|
3510 kg (± 3%)
|
|
Design Temperature (Frame & Tank)
|
-40 to +130 °C
|
|
Pressure
|
Working
|
1.70 bar
|
|
Test
|
2.65 bar
|
Material
|
Tank (Shell & Ends)
|
SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
|
|
Frame
|
SPA-H or equivalent
|
Insulation
|
Shell
|
Rockwool (50kg/m3) 50mm thick on aluminium foil.
|
|
Ends
|
Glasswool (16kg/m3) thickness to suit on aluminium foil.
|
Steam Heating |
6 runs.
110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted. |
|
Manhole
|
500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
|
|
Safety Relief Assembly |
1-off.
2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad. |
|
Air Inlet
assembly |
DN 40 ball valve terminating with 1½" BSP connection and cap.
The assembly is situated off centre on a tangential tank pad. |
|
Top Discharge
|
DN80 stainless steel 316 tank pad with a blind flange.
The assembly is fitted on centre on a horizontal tank pad. |
|
Bottom
Discharge |
DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly
valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain. |
|
Thermometer
|
A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual
scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar. |
|
Document
holder |
A clear plastic document holder ø110mm is fitted to the rear right hand side beam.
A drain hole is provided at the lowest point. |
|
Calibration
|
A calibration plate marked in cm/litres is fitted on the spillbox side wall.
No calibrated stainless steel grade dipstick and bracket fitted. |
|
Design Code
|
ASME VIII DIV. 1
|
|
Approval
|
IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3
|
Q: I want the Liquid Tank Container with loading&unloading system,can you supply?
A:Yes,the loading&unloading system is the option configuration,you can choose it as you want.
Q: Do you have the certificates to meet us the transportation ways of the land truck,Sea Boat and Railway?
A:Yeah,of course,but the price will be very different by different transportation ways;So kindly please let me know your exact transportation ways before the quoting;And also the certificates will be ready after the tank container passed all kinds of the testing&inspection.
Q: Do you have the stocked tank containers?
A:Yes,but the price will be higher than the normal one.
Q: Can i have the drawings of this ISO Storage tank containers?
A:Yeah,the existing simple similar drawings of the tank container for your reference only for the beginning,will make the more precise drawings after getting the down payment,and will send this drawing to you for your confirmation before production.
Q: Can i make the discharging valves at the bottom?
A:Yes,the discharging valves can be at the bottom or at the top,you can choose as your actual request.
Q: How can i pay the money without risk?
A:You can pay the money to us via Alibaba Trade Assurance,then the alibaba can guarantee your money safe and the delivery on time.
Q: Can i do your agent in our country or some district?
A:Yes,if you quantity is enough,no problem,the 50units for the first time is okay.