4X2 6X4 Compression Truck Bin Lorry Refuse Transport Truck Waste Compactor Garbage Truck

• Type: Rear Loader
• Certification: CE
• Volume: 3001-6000L
• Emission Standard: Euro 3
• Transmission Type: Manual
• Payload: 3 Tons
• Model NO.: JSX1029TL
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Dongfeng
• Usage: Compression Type
• Condition: New
• Steering: Power Steering, Recirculating Ball Steering Gear
• Service Brake: Hydraulic Brake
• Use: Dump, Sealed, Compression Type, Garbage Truck
• Transport Package: Bulk Ship
• Trademark: JUSHIXIN
• Origin: China
• Production Capacity: 200units/Month

Product Description

New Garbage Truck Garbage Compactor Truck 8t 10tons Sanitation Compression Rubbish Collect Trucks Special Design

The garbage compression truck consists of a sealed garbage compartment, a hydraulic system and an operating system. The whole compressed car is fully sealed, and all sewage from the compression, dumping, and compression process enters the sewage tank, which completely solves the problem of secondary pollution during the transportation of the compression car. Imported parts are used as key components, which have pressure. The advantages of large size, good airtightness, convenient operation and safety.




 

Cab	Flat top	Horsepower (PS)	115PS
Dimensions (mm)	5650×2050×2400	Driving form	Steering wheel / right drive
Self weight (kg)	4200	Total weight (kg)	8495
Production cycle	30 days	Warranty&certificate	Have
Item	Specification
Cab	Dongfeng Little Dorica D6 Cab
Front axle	2.5 tons
Rear axle	5 tons
Gearbox	5-speed gearbox
Vehicle frame	Through reinforced girder
Tire	7.50R16 type steel tire 6psc
ABS	Have
PTO interface	Have
PTO	Have
Front / rear overhang (mm)	front:1040,rear:1310
Departure corner	front:20,rear:17
suspension	Leaf spring 6/6 + 5
Number of axles	2
Wheelbase (mm)	3300
Number of tires	6
Tread (mm)	1485/1540
Tire specifications	7.00R16
Drive type	4*2
engine	4DX23-120
Emission Standards	Euro 3
brake	Drum
Braking System	Air brake

The rear carriage is made high strength Q345 manganese stee, the thickness is 3mm for side panel and 4 mm for bottom. And the bottom of the garbage carriage is specially strengthened, which is not easy to be get collapsed, deformed and wearing, and it can extend the service life of the product.  Also the slider of the pushing shovel is made of high quality MC nylon,which is self-lubricating and highly wear resistant. 

The garbage carriage are of acid, alkali, corrosion resistance, since it will be treated with electrophoresis.  And it can work at least 8 to 10 years not go rusting. 

Pushing shovel with 3 section hydraulic cylinders is installed inside the tank, which can compress or push out the garbage already loaded. And its loading capacity is almost 2.5 times of those normal garbage trucks without compression mechanism . 

Related Products