High-Quality 20FT ISO T11 Chemical Tank for Industrial Use

• Customization: Available
• Certification: ISO9001, Csc, CE/EU, ECE, CE
• Insulation Type: Polyurethane Insulation
• Model NO.: JSXT2040TC223 iso tank container
• Lining Material: Epoxy Resin
• Material: Carbon Steel
• Type: Tank Container
• Loading Capacity: 26000L
• Maximum Gross Weight: 36000 Kg
• Tare: 4150 Kg
• Shell Material: Shell Mild Steel Q345b, 5.0mm Shell
• Shell Thickness: 4.4 mm Nominal
• Frame Material: Ends Thickness
• Manhole: Dia. 20inch Seal Plastic-Lined Steel Tank Cover
• Compartment: Single Compartment
• Strengthen Ribbers: Both Sides and Ends.
• Walkway on The Top: Anti-Skid Net Spread on Both Side
• Volume: 5.89m * 2.32m * 2.31m
• Length: 40'
• Gross Weight: 17.5t
• Experice: 10 Years
• Producing Period: >20 Days
• Transport Package: by Bulk Cargo Ship / RO-RO/Container Vessel
• Specification: 6058*2438*2591/mm carbon steel tanker
• Trademark: JUSHIXIN
• Origin: Mainland of China
• HS Code: 8708996000
• Production Capacity: 200units/Month
• Package Size: 605.00cm * 243.00cm * 259.00cm
• Package Gross Weight: 36000.000kg

Product Description

ISO T11 20ft Liquid Chemicals Storage Tank Container for Sale

Product Parameters

 

Specifications - ISO tank container manufacturers
Frame Dimensions (L x W x H)		6058 x 2438 x 2591 mm
Nominal Capacity		25000 litre (±0.75%)
Maximum Gross Mass		36000 kgs
Tare Mass		3510 kg (± 3%)
Design Temperature (Frame & Tank)		-40 to +130 °C
Pressure	Working	1.70 bar
	Test	2.65 bar
Material	Tank (Shell & Ends)	SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%)
	Frame	SPA-H or equivalent
Insulation	Shell	Rockwool (50kg/m3) 50mm thick on aluminium foil.
	Ends	Glasswool (16kg/m3) thickness to suit on aluminium foil.
Steam Heating	6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted.
Manhole	500mm low profile, 8 point fixing with Super Tanktyt Lid seal.
Safety Relief Assembly	1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad.
Air Inlet assembly	DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad.
Top Discharge	DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad.
Bottom Discharge	DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain.
Thermometer	A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar.
Document holder	A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point.
Calibration	A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted.
Design Code	ASME VIII DIV. 1
Approval	IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3

1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate, compared with ordinary 5 mm thick single-layer tank, the strength is greatly improved;

2. Outer layer - tempered glass fiber thickness of 4.0mm or more, good compressive and seismic resistance. It has strong corrosion resistance and corrosion resistance;

3.Unique technology is adopted between the inner and outer layers to make it reach a gap of 0.1-1mm, so as to eliminate hidden dangers from the root;

4. Leak detector 24 hours to monitor, to prevent leakage caused by security risks;

5. Widely used for storage and transportation in dairy, beverage, wine technology, with function of anti-seismic, anti-explosion, leakage-proof and cooling.
Detailed photos for the Tank container:


Factory Workshop:


3.More Styles for the ISO tanker container:



4.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

5.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.

6.BRIEF INTRODUCTION TO OUR FACTORY:
Henan Jushixin Transportation Equipment Co.Ltd is the professional manufacturer of ISO tank container,such as standard liquid tanks, electrical heating tanks, reefer tanks, food grade tanks, baffle tanks, swap tanks, gas tanks, H2O2 tanks, AHF tanks, bitumen tanks, different types of lining tanks, etc, and 10ft tanks, offshore tanks, IBC/SBC ,etc, with high standard machinery and automatic equipment, powerful R&D team and elite sales team, we have built a long business relationship with many world famous enterprises.pls contact us if any interset.





7.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
>>>Offering the one-stop full lifecycle services;
>>>Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service;
>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.

8.Buying Guides
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
 

Contact information