| Customization: | Available |
|---|---|
| Certification: | ISO9001, CSC, CE/EU, ECE, CE |
| Material: | Steel Structure |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specifications( Portable Tank): | |||
| Frame Dimensions | External | 6058 x 2438 x 2591 | MM |
| (L x W x H) | 20 x 8 x 8.5 | FT | |
| Max. Capacity (Nominal) | 10,900L 15,000L 17,500L 21,000L 24,000L 25,000L 26,000L 31,000L 33,000L 35,000L | L | |
| Max. Gross Mass | 36,000 | KGS | |
| Tare Mass (Nominal) | --- | KGS | |
| Max. Payload | 32450 | KGS | |
| Pressure | Working pressure | 4 | Bar |
| Test pressure | 6 | Bar | |
| Design Temperature | Frame | -40 to +130 ºC | |
| Tank | |||
| Material | Frame | SPA-H,Q345D or equivalent | |
| Tank | 316L/SAN50028-7/WNr 1.4402/1.4404 | ||
| Insulation | Shell | Rock wood(50kgs/M3), Max thickness 50mm | |
| Ends | Rock wood(16kgs/M3) | ||
| Steam Heating | 6 runs, 110mm width stainless steel 304 | ||
| Manhole | 500 low TIR provision, 8 point fixing with super tanktyt Lid seal | ||
| Safety Relief | 2½" BSP Supermaxi Highflow relive, without gauze, | ||
| Pressure only set at +4.4 bar (63.8psi). | |||
| Air Inlet Assembly | 1.5 BSP air inlet with 1 1/2BSP connection, | ||
| Bottom Discharge | 3 stainless steel foot-valve with butterfly valve and blank flange / 3 BSP cap and chain. | ||
| Top Discharge | Provision only | ||
| Document holder | A clear plastic document holder ø 110mm is fitted to the rear right hand side beam. | ||
| Decals | One set of mandatory decals is fitted. | ||
| Data Plates | One set of stainless steel data plates | ||
| Calibration | Yes, have it | ||
| Stacking | Each container is approved for 9 high stacking. | ||
){kind=link}