New 22500 Liters 20ft Bulk Cement ISO Tank Container
Loading Capacity |
22500L |
Maximum Gross Weight |
32000 KG |
Tare |
4200KG |
Working Pressure |
2.2Bar |
Test Pressure |
3.5Bar |
Relief Valve Set Pressure |
2.3 bar / -0.21 bar/vac |
Ambient Temp. Range |
-19°C up-to +80°C |
Maximum Cargo Temp |
80°C |
Shell Material |
Dia. 2400mm Cylindrical Shell Mild Steel Q235B, 4,5 mm shell, 5,0 mm dish ends |
Standard fitting |
Manhole |
500mm diameter 6 point fixing, 14mm x 12mm seal, located centre |
Air Source pressure |
0.2~0.3 Mpa. |
Air Supply capacity |
≥8 m3/min. |
Air-inlet diameter |
3" cam lock type joint. |
Air-Outlet diameter |
4" male adaptor |
Average speed of discharge |
conveying cement to the place 30m high, 30m far,1.0-1.5t/min. |
Remnant Ratio |
cement: ≤0.3% (Cement: Not more than 100kg) |
Gaskets & Seals |
Parts in contact with cargo |
The dry compressed airflow via 3" cam-lock type joint enters into a main pipe |
with a 2.5" one-way valve, a 2" safety valve, 1/2"safety valve and a pressure gauge, then goes into two air cavities at each side of the inside of the tank through two branch pipes which separately connected to the tank and main pipe. Another airflow goes through a 1" ball valve and a 1" one-way valve into the unloading pipe in order to speed up unloading cement. |
Pipe System |
Unloading pipe |
4" steel pipe. One discharge butterfly valve and one 4" male adaptor are fixed on the discharge pipe |
Data Plate / Markings |
Stainless steel data plate detailing specifications fitted rear end |
Frame |
Frame is composed of front and rear end frames, top and bottom. Each end frame is constructed by two (2) corner posts, top and bottom end rails, and four (4) thick diagonal corner plates.side rails, two (2) barrel supports, two (2) saddle s, four (4) corner fittings. |
Walkway |
400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to rear of manhole's spill-box |
Ladder |
Ladder at container both side. |
Features |
The tank containers are suitable for the transportation of bulk cement or coal powder by road. All materials used in the construction shall withstand extremes of temperature range from -19ºC to +80ºC / -2,2ºF to +176ºF without effecting on the strength of the container. All tanks are of the highest quality design and construction, and conform strictly to the latest international approvals.
26.0R Loading Capacity
26.000 LTR Tank Volume
20FT ISO Full Frame Design
Design temp. -19ºC to +80ºC / -2,2ºF to +176ºF
Max. Gross Weight 32,000 kg / 70548 LBS
4"male adaptor
Loading weight 27,800 kg / 61288 LBS |
1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate, compared with ordinary 5 mm thick single-layer tank, the strength is greatly improved;
2. Outer layer - tempered glass fiber thickness of 4.0mm or more, good compressive and seismic resistance. It has strong corrosion resistance and corrosion resistance;
3.Unique technology is adopted between the inner and outer layers to make it reach a gap of 0.1-1mm, so as to eliminate hidden dangers from the root;
4. Leak detector 24 hours to monitor, to prevent leakage caused by security risks;
5. Widely used for storage and transportation in dairy, beverage, wine technology, with function of anti-seismic, anti-explosion, leakage-proof and cooling.
Detailed photos for the Tank container:
Factory Workshop:
3.More Styles for the ISO tanker container:
4.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
5.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.
6.BRIEF INTRODUCTION TO OUR FACTORY:
Henan Jushixin Transportation Equipment Co.Ltd is the professional manufacturer of ISO tank container,such as standard liquid tanks, electrical heating tanks, reefer tanks, food grade tanks, baffle tanks, swap tanks, gas tanks, H2O2 tanks, AHF tanks, bitumen tanks, different types of lining tanks, etc, and 10ft tanks, offshore tanks, IBC/SBC ,etc
, with high standard machinery and automatic equipment, powerful R&D team and elite sales team, we have built a long business relationship with many world famous enterprises.pls contact us if any interset.
7.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
>>>Offering the one-stop full lifecycle services;
>>>Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service;
>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.
8.Buying Guides
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
Contact information