ISO tank container 20ft for transporting oxygen, nitrogen, argon, co2, lng on sea
| Codes and regulations |
RID/ADR, IMDG, ASME VIII DIV 1-2017Ed; |
| T75 UN PORTABLE TANK TIR;UIC;CSC;TC;FRA;CFR49;ISO 1496/3;ISO Standard 1161 |
| Guidelines for tank container |
T75 UN Portable Tank |
| ISO Size and type code |
42K7 |
| Maximum Allowed Loading Weight |
17510kgs |
| Tare Weight |
11700kgs |
| Allowed stacking weight |
192000kgs |
| Manufacturing license level |
Inside tank |
C3 |
| |
outside tank |
|
| Max. Working Pressure(Mpa.) |
Inside tank(MPa) |
0.75 |
| |
outside tank(MPa) |
-0.1(Vacuum) |
| Min. Working Tempretrues |
Inside tank |
-196°C |
| |
outside tank |
-40°C |
| Design Pressure(Mpa.) |
Inside tank |
0.8 |
| |
outside tank |
-0.103 |
| Design Tempretrues |
Inside tank |
-196 °C |
| |
outside tank |
50 °C |
| The Main material |
Cover |
inside tank |
SA-240M 304 |
| |
|
outside tank |
Q345R |
| |
Shell |
inside tank |
SA-240M 304 |
| |
|
outside tank |
Q345R |
| |
Frame work |
Hollow Section |
Q345-D--GB/T1591 |
| |
|
Plates |
Q345-D--GB/T1591 |
| |
|
Rolled section |
Q345-D--GB/T1591 |
| Overall Size(Frame)/L*W*H/mm |
12192*2438*2591 |
| Media |
Inside tank |
LNG |
| Media Characteristics |
Inside tank |
explosive |
| Paint |
Frame |
30µm +40µm +50µm |
| |
Shell |
30µm +40µm +50µm |
| Total Volume(L) |
45700 |
| Type Of Insulation |
High Vacuum Multi-layer Insulation |
| Material |
Aluminium Foil |
| Provision for Baffles |
Five sets of surge baffles shall be installed. |
| Corrosion allowance |
Inside tank |
0mm |
| |
outside tank |
0mm |
| Nominal thickness |
Shell |
Inside tank |
6mm |
| |
|
outside tank |
4.0mm |
| |
Head |
Inside tank |
8mm |
| |
|
outside tank |
6.0mm |
| Air pressure test pressure |
Inside tank(MPa) |
1.17 |
| Fittings |
All fittings, including valves and pipe sections shall be cleaned and then fitted to the tank. |
| Welding joint coefficient |
Inside tank |
1 |
| |
outside tank |
0.85 |
| Leakage Test and Nitrogen Purge |
After cleaning, all valves, blind flanges, caps and connected piping are installed and a leak test is performed at16.2 bar using clean and dry air. The vessel will be delivered in a Nitrogen purged condition. Nitrogen will be used (O2 < 0.5% residual oxygen, 0.5 bar pressure). |
| Main hazard category |
2.1 |
| Design service life |
20 years |
| Mode of transportation |
Road,Sea,Railway |
| Safety valve |
Quantity |
Two |
| |
Set Pressure |
+8bar |
| Liquid Level gauge |
Grade |
2.5 |
| |
Quantity |
One |
| |
Measuring range(Kpa) |
0~2.0M H2O |
| Loading and unloading device |
Gas phase joint |
Type |
Flange connection |
| |
|
Nominal Diameter |
DN50 |
| |
liquid phase joint |
Type |
Flange connection |
| |
|
Nominal Diameter |
DN50 |
| Pressure gauge |
Quantity |
One |
| |
Measuring range(Mpa) |
0~1.6 |
| |
Precision |
1.6 Class |
1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate, compared with ordinary 5 mm thick single-layer tank, the strength is greatly improved;
2. Outer layer - tempered glass fiber thickness of 4.0mm or more, good compressive and seismic resistance. It has strong corrosion resistance and corrosion resistance;
3.Unique technology is adopted between the inner and outer layers to make it reach a gap of 0.1-1mm, so as to eliminate hidden dangers from the root;
4. Leak detector 24 hours to monitor, to prevent leakage caused by security risks;
5. Widely used for storage and transportation in dairy, beverage, wine technology, with function of anti-seismic, anti-explosion, leakage-proof and cooling.
Detailed photos for the Tank container:
Factory Workshop:
3.More Styles for the ISO tanker container:
4.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
5.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.
6.BRIEF INTRODUCTION TO OUR FACTORY:
Henan Jushixin Transportation Equipment Co.Ltd is the professional manufacturer of ISO tank container,such as standard liquid tanks, electrical heating tanks, reefer tanks, food grade tanks, baffle tanks, swap tanks, gas tanks, H2O2 tanks, AHF tanks, bitumen tanks, different types of lining tanks, etc, and 10ft tanks, offshore tanks, IBC/SBC ,etc
, with high standard machinery and automatic equipment, powerful R&D team and elite sales team, we have built a long business relationship with many world famous enterprises.pls contact us if any interset.
7.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
>>>Offering the one-stop full lifecycle services;
>>>Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service;
>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.
8.Buying Guides
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
Contact information
){kind=link}