| Customization: | Available |
|---|---|
| Certification: | ISO9001, ECE, CE |
| Material: | Carbon Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Dimension of the 20FT 22.5CBM Bulk Cement Tank Container | ||||||
| Description and Specification of Commodity | ||||||
| Loading Capacity | 22500L | |||||
| Maximum Gross Weight | 32000 KG | |||||
| Tare | 4200 KG | |||||
| Working Pressure | 2.2Bar | |||||
| Test Pressure | 3.5Bar | |||||
| Relief Valve Set Pressure | 2.3 bar / -0.21 bar/vac | |||||
| Ambient Temp. Range | -19°C up-to +80°C | |||||
| Maximum Cargo Temp | 80°C | |||||
| Shell Material | Dia. 2400mm Cylindrical Shell Mild Steel Q345B, 4,5 mm shell, 5,0 mm dish ends | |||||
| Design Code / Approvals | CCS. (China Classification Society) | |||||
| Standard fitting | ||||||
| Manhole | 500mm diameter 6 point fixing, 14mm x 12mm seal, located centre | |||||
| Air Source pressure | 0.2~0.3 Mpa. | |||||
| Air Supply capacity | ≥8 m3/min. | |||||
| Air-inlet diameter | 3" cam lock type joint. | |||||
| Air-Outlet diameter | 4" male adaptor | |||||
| Average speed of discharge | conveying cement to the place 30m high, 30m far, 1.0-1.5t/min. | |||||
| Remnant Ratio | cement: ≤0.3% (Cement: Not more than 100kg) | |||||
| Gaskets & Seals | Parts in contact with cargo, PTFE | |||||
| The dry compressed airflow via 3" cam-lock type joint enters into a main pipe | ||||||
| with a 2.5" one-way valve, a 2" safety valve, 1/2"safety valve and a pressure gauge, then goes into two air cavities at each side of the inside of the tank through two branch pipes which separately connected to the tank and main pipe. Another airflow goes through a 1" ball valve and a 1" one-way valve into the unloading pipe in order to speed up unloading cement. | ||||||
| Pipe System | ||||||
| Unloading pipe | 4" steel pipe. One discharge butterfly valve and one 4" male adaptor are fixed on the discharge pipe | |||||
| Data Plate / Markings | Stainless steel data plate detailing specifications fitted rear end | |||||
| Frame | Frame is composed of front and rear end frames, top and bottom. Each end frame is constructed by two (2) corner posts, top and bottom end rails, and four (4) thick diagonal corner plates.side rails, two (2) barrel supports, two (2) saddle s, four (4) corner fittings. | |||||
| Walkway | 400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to rear of manhole's spill-box | |||||
| Ladder | Ladder at container both side. | |||||
| Features | The tank containers are suitable for the transportation of bulk cement or coal powder by rail, road and ship. All materials used in the construction shall withstand extremes of temperature range from -19ºC to +80ºC / -2,2ºF to +176ºF without effecting on the strength of the container. All tanks are of the highest quality design and construction, and conform strictly to the latest international approvals. 26.0R Loading Capacity 26.000 LTR Tank Volume 20FT ISO Full Frame Design Design temp. -19ºC to +80ºC / -2,2ºF to +176ºF Max. Gross Weight 32,000 kg / 70548 LBS 4" male adaptor Loading weight 27,800 kg / 61288 LBS Approvals by CCS's Register |
|||||
| ITEM NAME | WARRANTY | ITEM NAME | WARRANTY | |||
| MAIN FRAME | FRAME | 1 YEAR | RUNNING GEAR | AXLE | 6 MONTHS | |
| SUSPENSION | 6 MONTHS | AXLE BEARING | 3 MONTHS | |||
| KING PIN | 1 YEAR | WHEEL HUB | 3 MONTHS | |||
| BALANCE ARM | 3 MONTHS | TIRE | 6 MONTHS | |||
| ITEM NAME | WARRANTY | ITEM NAME | WARRANTY | |||
| BRAKING DEVICE | BRAKE DRUM | 3 MONTHS | SUPPORT DEVICE | LANDING GEAR | 6 MONTHS | |
| BRKE CHAMBER | 3 MONTHS | SPARE WHEEL CARRIER | 6 MONTHS | |||
| AIR RESERVOIR | 6 MONTHS | |||||
| ITEM NAME | WARRANTY | |||||
| OTHERS | LEAF SPRING | 3 MONTHS | ||||
| BRAKE CHAMBER DIAPHRAGM | 3 MONTHS | |||||
| EMERGENCY RELAY VALVE | 3 MONTHS | |||||
| BRAKE SHOE | 3 MONTHS | |||||
| RELAY VALVE | 3 MONTHS | |||||
){kind=link}