| After-sales Service: | One Time Purchase, Long-Life Service |
|---|---|
| Warranty: | 24months for This Terminal Container Trailer |
| Type: | Semi-Trailer |
| Load Capacity: | 50T |
| Certification: | ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949, for Terminal Semi Trailer |
| Wheel Base: | 7000-8000mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Dimension of the 3 Axle 20&40Feet Flatbed Terminal Container Semi Trailer | ||||||
| Overal Size | 12795*2790*1550/mm | |||||
| Inside Size | 12030*2500*1500 | |||||
| Fifth Wheel Height | 1300mm | |||||
| Wheel Base | 2050mm | |||||
| Track | 1310mm | |||||
| (The above dimension will be adjusted according to the tractor specification.) | ||||||
| Weight: | ||||||
| Payload: | 60,000kg | |||||
| Tare weight: | Approx. 7,300kg | |||||
| G.V.W.R.: | Approx. 67,300kg | |||||
| Specification | ||||||
| Mainbeam | Material is Q345B; Section height 500mm, 14/8/16; | |||||
| Side Beam | Q345B; 160mm Channel steel; | |||||
| Twist locker | twist lockers 12pcs; 10 pcs of container stopper; | |||||
| Kingpin: | 90# or 50# Assembly type Kingpin | |||||
| Welding standard: | All welding are to be done by qualified welder per applicable national standard | |||||
| Running gear: | ||||||
| Suspension: | 6 sets of the heavy mechanical suspensions(leaf spring 13mm*90mm*13pcs) | |||||
| Axle: | Standard axle, 3pcs*13 ton capacity | |||||
| Brake system: | A system with emergency brake and parking brake; Dual line ,air brake, piggyback spring on all axles; Six units of T30/30 chamber; two units of reliable local brand 40L air tank; |
|||||
| Emergency relay valve: | WABCO relay valve | |||||
| Tire: | 12R22.5, 12 pcs. | |||||
| Rim: | 9.00-22.5, 12 pcs. | |||||
| Landing gear: | 28T | |||||
| Electrical System: | ||||||
| Voltage: | 24 Volt | |||||
| Receptacle: | 7-pin ISO 1185 socket; | |||||
| Reflector: | Per customer requirement | |||||
| Cable | One set of 6-core standard Cable | |||||
| Accessories: | ||||||
| Mud guard: | Steel mud guard | |||||
| Spare wheel carriers: | 1sets | |||||
| Tool box: | One piece, 1.5m×0.5m×0.5m(Size can be chosen freely)(equipped with 1 unit tyre spanner, 1 unit gudgeon sleeve and 1 unit cranking bar). | |||||
| Remarking: | Acrylic anticorrosive paint | |||||
| Note: All the details not mentioned above should comply with Chinese regulations. If any component or structure changed, the price shall be modified accordingly. | ||||||
These container chassis are ready for shipment to port(Already made the wax to avoid to be rust&corrossion),one of our African customers.They buy these container chassis
for use in their ports.This is a small tender project,the total is 9 units.After receiving the customer's inquiry,I immediately
provide the quotation according to the customer's request.The customer thought out reply was quick.I communicated
with the customoer for 25 days,and finally helped the customer win the bid and reach the cooperation.
In the process of communicating with customers,we can timely provide good solutions according to custmers's feedback.
And the customer is very satis fied to our product quality,pay attention to detail and quality.
SEND INQUIRY AT BELOW!
Or connect with Maggie by ONE THREE EIGHT THREE EIGHT TWO SEVEN EIGHT THREE FIVE NINE
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}