| Customization: | Available |
|---|---|
| Certification: | ISO9001, CSC, CE/EU, ECE, CE, CCS Approved for Cement Container |
| Material: | Carbon Steel, Carbon Steel for This Tank Container |
|
Still deciding? Get samples of US$ 10900/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Dimension of the 20FT 22.5CBM Bulk Cement Tank Container | ||||||
| Description and Specification of Commodity | ||||||
| Loading Capacity for this Cargo containers | 22500L | |||||
| Maximum Gross Weight for this tank container | 32000 KG | |||||
| Tare for this tank container | 4200 KG | |||||
| Working Pressure for this tank container | 2.2Bar | |||||
| Test Pressure for this tank container | 3.5Bar | |||||
| Relief Valve Set Pressure for this tank container | 2.3 bar / -0.21 bar/vac | |||||
| Ambient Temp. Range for this tank container | -19°C up-to +80°C | |||||
| Maximum Cargo Temp for this tank container | 80°C | |||||
| Shell Material for this tank container | Dia. 2400mm Cylindrical Shell Mild Steel Q345B, 4,5 mm shell, 5,0 mm dish ends | |||||
| Design Code / Approvals for this tank container | CCS. BV,Lloyds | |||||
| Standard fitting | ||||||
| Manhole for this tank container | 500mm diameter 6 point fixing, 14mm x 12mm seal, located centre | |||||
| Air Source pressure for this tank container | 0.2~0.3 Mpa. | |||||
| Air Supply capacity for this tank container | ≥8 m3/min. | |||||
| Air-inlet diameter for this tank container | 3" cam lock type joint. | |||||
| Air-Outlet diameter for this tank container | 4" male adaptor | |||||
| Average speed of discharge for this tank container | conveying cement to the place 30m high, 30m far, 1.0-1.5t/min. | |||||
| Remnant Ratio for this tank container | cement: ≤0.3% (Cement: Not more than 100kg) | |||||
| Gaskets & Seals for this tank container | Parts in contact with cargo, PTFE | |||||
| The dry compressed airflow via 3" cam-lock type joint enters into a main pipe | ||||||
| with a 2.5" one-way valve, a 2" safety valve, 1/2"safety valve and a pressure gauge, then goes into two air cavities at each side of the inside of the tank through two branch pipes which separately connected to the tank and main pipe. Another airflow goes through a 1" ball valve and a 1" one-way valve into the unloading pipe in order to speed up unloading cement. | ||||||
| Pipe System | ||||||
| Unloading pipe for this tank container | 4" steel pipe. One discharge butterfly valve and one 4" male adaptor are fixed on the discharge pipe | |||||
| Data Plate / Markings for this tank container | Stainless steel data plate detailing specifications fitted rear end | |||||
| Frame for this tank container | Frame is composed of front and rear end frames, top and bottom. Each end frame is constructed by two (2) corner posts, top and bottom end rails, and four (4) thick diagonal corner plates.side rails, two (2) barrel supports, two (2) saddle s, four (4) corner fittings. | |||||
| Walkway for this tank container | 400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to rear of manhole's spill-box | |||||
| Ladder for this tank container | Ladder at container both side. | |||||
| Features for this tank container | The tank containers are suitable for the transportation of bulk cement or coal powder by rail, road and ship. All materials used in the construction shall withstand extremes of temperature range from -19ºC to +80ºC / -2,2ºF to +176ºF without effecting on the strength of the container. All tanks are of the highest quality design and construction, and conform strictly to the latest international approvals. 26.0R Loading Capacity 26.000 LTR Tank Volume 20FT ISO Full Frame Design Design temp. -19ºC to +80ºC / -2,2ºF to +176ºF Max. Gross Weight 32,000 kg / 70548 LBS 4" male adaptor Loading weight 27,800 kg / 61288 LBS Approvals by CCS's Register |
|||||
Q: I want the Powder Tank Container with air compressor and Diesel Engine,can you supply?
A:Yes,the air compressor and Diesel Engine is the option configuration,you can choose it as you want.
Q: Do you have the certificates to meet us the transportation ways of the land truck,Sea Boat and Railway?
A:Yeah,of course,but the price will be very different by different transportation ways;So kindly please let me know your exact transportation ways before the quoting;And also the certificates will be ready after the tank container passed all kinds of the testing&inspection.
Q: Do you have the stocked tank containers?
A:Yes,but the price will be higher than the normal one.
Q: Can i have the drawings of this ISO Storage tank containers?
A:Yeah,the existing simple similar drawings of the tank container for your reference only for the beginning,will make the more precise drawings after getting the down payment,and will send this drawing to you for your confirmation before production.
Q: Can i make the discharging valves at the bottom?
A:Yes,the discharging valves can be at the bottom or at the top,you can choose as your actual request.
Q: How can i pay the money without risk?
A:You can pay the money to us via Alibaba Trade Assurance,then the alibaba can guarantee your money safe and the delivery on time.
Q: Can i do your agent in our country or some district?
A:Yes,if you quantity is enough,no problem,the 50units for the first time is okay.
){kind=link}